Gauges


Dual ADF  ADF, Dual ... now tune two NDBs at the same time, by John Bell, DCA-1013.  This is a triple-function gauge with Dual ADF Tuner, Dual digital readouts of bearing to station and Dual needle ADF indicator.

Revised version November 2008 
AutoCoord Switch 
  AutoCoord Switch for the FS2002 R4D Panel 
Automixture gauge for FS2004 default DC-3 by Dave Bitzer and Mark Beaumont. 
Automixture gauge for FS2004 MAAM DC-3 by Dave Bitzer and Mark Beaumont.
Bubble Sextant Gauge by Dave Bitzer and Mark Beaumont. 
  Digital Readouts, 25 options for FS2002 and FS2004 panels 

Driftmeter by Dave Bitzer 

  E6B Virtual Computer.
  E6B Computer manual.
  Elevator Trim Gauge for TR-1 panel
Fuel Gauge, Four-Tank for fs9 DC-3 by John Bell DCA-1013
Fuel Gauge, Four-Tank for fs9 MAAM DC-3, by John Bell DCA-1013 
 

Hangar Door Switch by Darrel Woodhouse. Open and close DCA hangar doors from a switch on your panel 

  Kneeboard Add-on for DC-3 aircraft. VERSION 3 ... E6B, images, and more. By Mark Beaumont ... For FS2004 only.
 

The Lift Reserve Indicator integrates both airspeed and angle of attack in a single readout reliably and continuously displaying an aircraft's margin over stall despite the wide range of variables to which an aircraft is subject. By Darrel Woodhouse

No Smoking and Fasten seat belts signs and switches.  By Darrel Woodhouse. Suitable for both FS9 and FSX.

  OAT gauge, Digital, deg F or C with including toggle switch 

Pilot keys hang on a peg (which is always visible and doesn't take much space), and rotate in accordance with the bank angle. By Darrel Woodhouse. Suitable for both FS9 and FSX.

Pilot keys hang on a peg (which is always visible and doesn't take much space), and rotate in accordance with the bank angle.  Senior Pilots only.  By Darrel Woodhouse. Suitable for both FS9 and FSX.

  RMI for the R4D panel 
  RMI, Dual Needle, for Training Panel 
Timers for your DC-3 panels, FS98, FS2000, FS2002, and FS2004. 
Wind Gauge for FS2004 & FSX ... This one reads correctly!  
Wing and Logo lights for the MAAM-SIM DC-3 (With kind permission), by Darrel Woodhouse. Suitable for both FS9 and FSX. Textures are included to optionally add the popular Eagle motif to the tail when the DC-3 Airways Classic N1776 livery is installed. Also included are three digital versions of the Carb Air Temperature gauge